Gas Cooker & Hob Installation Stoke-on-Trent
Want a safe connection for your new cooker or hob? With BrightBurn Solutions – Boiler & Gas Services, you get a Gas Safe registered engineer who explains the process, carries out the work properly, and makes sure your appliance is running as it should.
"Quick, professional and clear—fitted the hob and left everything in order. Highly recommend."
Why choose us for cooker & hob installs
A proper installation is more than attaching a hose. We check pipe sizing, isolation valve position, and ventilation before we even touch the appliance. We carry the right fittings and sealants so everything is correct the first time.
We're not tied to one brand. Whether you've chosen Bosch, Beko, Rangemaster or another make, we follow the manufacturer literature and Gas Safe rules.
We advise on hob clearances in relation to cupboards, walls and extractor fans—so the job lasts and is safe to cook on.
For homes near Trentham Gardens, Hanley by the Potteries Museum & Art Gallery, or tucked just off the A500, we plan realistic arrival windows.
If you searched for gas hob installation stoke-on-trent, you'll find we also provide expert advice and professional installation services for all types of gas cooking appliances.
Step-by-step installation process
- Photos & short survey
Send us pictures of the appliance, connection point and surrounding kitchen. We can spot access issues, valve positions and likely pipework routes. - Arrival & protection
We arrive with shoe covers and dust sheets, and confirm safe isolation before starting. Floors and worktops are covered so your kitchen stays clean. - Gas run & connection
We check existing pipework and install or adjust isolation valves where necessary. For a freestanding cooker, we fit a flexible hose with bayonet fitting. - Testing & adjustments
We perform tightness testing with a manometer, confirm gas pressures and check for leaks. Burners are lit, flame picture checked, and controls verified. - Handover & notes
You'll see how to use safety features, how to shut off the valve, and what simple checks to do. We leave digital notes and can set reminders for future servicing.
For anyone searching for gas appliance fitting in Stoke-on-Trent, this step-by-step approach ensures your cooker or hob isn’t just connected—it’s connected properly, with evidence.
Safety & compliance
All gas work is completed by a Gas Safe registered engineer. ID is shown on arrival and you can verify details directly on the Gas Safe Register.
We check ventilation and clearances around your hob, confirm isolation valve positions, and test appliances for leaks and correct operation. If we find wider issues with your installation—such as undersized supply pipes, an old meter position, or pressure drops—we’ll explain options clearly and, if necessary, point you towards evidence-led fixes (see: boiler repair services).
Carbon monoxide safety is also explained in plain English. If you don’t already have an alarm, we’ll highlight placement and options.
Pricing & what's included
We keep pricing clear and predictable. We price from a short survey so your figure reflects your appliance and setup. Share photos for a fair range; we confirm a fixed scope before work starts. For broad guidance, see installation pricing on our pricing page.
What's Included
- Disconnection of old appliance (where safe)
- Supply and fit of appropriate hose/connection kit
- Isolation valve check/upgrade
- Gas tightness test and leak check
- Burner and control operation check
- Digital notes and handover
Cost Factors
- New isolation valve or pipe adjustments
- Access (tight cupboards, boxed-in pipework)
- Appliance type (freestanding vs built-in hob)
- Need to move or extend pipework
- Kitchen finishes (stone worktops, tiled backsplashes)
Whether it’s a straight gas cooker connection or a more involved gas hob fitting, you’ll get a clear, itemised quote with no surprises.
FAQs: Stoke-on-Trent Gas Cooker & Hob Installation
Do you disconnect and remove the old cooker/hob?
Yes—if it’s safe to do so. Disposal of old appliances can be arranged separately if required.
What if I don't have an isolation valve?
We’ll fit one. It’s a requirement for safety and future servicing.
Do you test for leaks?
Always. We perform tightness testing and confirm safe operation before leaving.
Can you fit customer-supplied cookers and hobs?
Yes. We’ll confirm compatibility and fit safely using the correct connections.
How long does it take?
Usually 1–2 hours, depending on access and any adjustments needed.
Do I get paperwork?
Yes—digital notes confirming safe connection, test results and any advisories.
Ready to book?
Send a couple of photos of the appliance, connection point and surrounding space. We’ll reply with a sensible range and realistic date.